Disc harrow - see and acknowledge
10/11/2020
Almost all work on the ground requires specialized equipment and certain equipment. For tillage, various tools are used, one of them is a disc harrow. This is a versatile unit with which you can perform many operations. You can buy spare parts for disc harrow here .
The purpose of the disc harrow
The disc harrow is primarily intended for loosening the surface layer of the soil, crushing the remains of the previous crop, destroying weeds, for cultivating fields, meadows and pastures, as well as:
- - to prepare soil for planting crops;
- - for mixing and loosening the surface layer of the soil;
- - prevents the drying of the earth, by sealing moisture in deeper layers;
- - for cutting and crushing weeds and planting them in deeper layers of the earth.
Disc harrow device
A disc harrow is a mounted or towed device, and it comes in various structures. But most often, it consists of 3 frames, central and lateral, interconnected.
The discs that ensure the operation of the harrow are located on the side frames in such a way that they easily turn in a horizontal plane. The configuration of frames, shafts and discs may vary depending on the type of soil, size and required capacity of the unit. The diagram shows a trailed heavy disc harrow.
Discs also differ in size: light (diameter 20-30 cm), heavy (diameter over 60 cm). They are round, multifaceted (the so-called "chamomile" see photo), five-toothed ("fleo-fleo").
The discs on the frame are hinged, which allows them to be rearranged at such an angle as to ensure maximum efficiency.
The principle of operation of the disc harrow
A tractor or other equipment pulls a harrow behind it, which is installed in such a way that the discs sink into the ground at a given depth and at the right angle. During the movement, the disks turn, loosening the soil and cutting off weeds. The immersion depth is adjustable and can vary from 5 to 25 cm. To fix the immersion depth of the disks, special weights are installed on the harrow. The discs, due to their shape, cut off the top layer of soil, breaking it into smaller clods. They are automatically cleared from adhering earth with the help of special scrapers-cleaners.
Advantages of a disc harrow
The disc harrow is a fairly versatile tool for tillage; among its main advantages, reliability, convenience and ease of use, and high productivity should be highlighted. You can choose a harrow based on the parameters you need: size, performance, purpose, and others, and thereby optimize the time, effort and finances spent on tillage. There are no overly complex mechanisms in the harrow, they are not difficult to maintain and repair. At the same time, a failed disk can be quickly and easily replaced right in the field without stopping work for a long time.
Disc harrow - price
Prices for disc harrows vary greatly and depend on the country of production, manufacturer, size, performance and other quality indicators.
So the cost of a domestically produced disc harrow in Ukraine starts from 15,000 UAH. These are small (1.3-2 m) units for processing relatively small areas. The price of harrows with a working width of more than 2 m averages 40,000-10,000 hryvnias.
At the same time, an imported heavy disc harrow can cost more than one hundred thousand hryvnias.
In our Art-Agro store you will find a wide range of spare parts for disc harrows from the world's best manufacturers.
Recommended products
Almost all work on the ground requires specialized equipment and certain equipment. For tillage, various tools are used, one of them is a disc harrow. This is a versatile unit with which you can perform many operations. You can buy spare parts for disc harrow here .
The purpose of the disc harrow
The disc harrow is primarily intended for loosening the surface layer of the soil, crushing the remains of the previous crop, destroying weeds, for cultivating fields, meadows and pastures, as well as:
- - to prepare soil for planting crops;
- - for mixing and loosening the surface layer of the soil;
- - prevents the drying of the earth, by sealing moisture in deeper layers;
- - for cutting and crushing weeds and planting them in deeper layers of the earth.
Disc harrow device
A disc harrow is a mounted or towed device, and it comes in various structures. But most often, it consists of 3 frames, central and lateral, interconnected.
The discs that ensure the operation of the harrow are located on the side frames in such a way that they easily turn in a horizontal plane. The configuration of frames, shafts and discs may vary depending on the type of soil, size and required capacity of the unit. The diagram shows a trailed heavy disc harrow.
Discs also differ in size: light (diameter 20-30 cm), heavy (diameter over 60 cm). They are round, multifaceted (the so-called "chamomile" see photo), five-toothed ("fleo-fleo").
The discs on the frame are hinged, which allows them to be rearranged at such an angle as to ensure maximum efficiency.
The principle of operation of the disc harrow
A tractor or other equipment pulls a harrow behind it, which is installed in such a way that the discs sink into the ground at a given depth and at the right angle. During the movement, the disks turn, loosening the soil and cutting off weeds. The immersion depth is adjustable and can vary from 5 to 25 cm. To fix the immersion depth of the disks, special weights are installed on the harrow. The discs, due to their shape, cut off the top layer of soil, breaking it into smaller clods. They are automatically cleared from adhering earth with the help of special scrapers-cleaners.
Advantages of a disc harrow
The disc harrow is a fairly versatile tool for tillage; among its main advantages, reliability, convenience and ease of use, and high productivity should be highlighted. You can choose a harrow based on the parameters you need: size, performance, purpose, and others, and thereby optimize the time, effort and finances spent on tillage. There are no overly complex mechanisms in the harrow, they are not difficult to maintain and repair. At the same time, a failed disk can be quickly and easily replaced right in the field without stopping work for a long time.
Disc harrow - price
Prices for disc harrows vary greatly and depend on the country of production, manufacturer, size, performance and other quality indicators.
So the cost of a domestically produced disc harrow in Ukraine starts from 15,000 UAH. These are small (1.3-2 m) units for processing relatively small areas. The price of harrows with a working width of more than 2 m averages 40,000-10,000 hryvnias.
At the same time, an imported heavy disc harrow can cost more than one hundred thousand hryvnias.
In our Art-Agro store you will find a wide range of spare parts for disc harrows from the world's best manufacturers.
Almost all work on the ground requires specialized equipment and certain equipment. For tillage, various tools are used, one of them is a disc harrow. This is a versatile unit with which you can perform many operations. You can buy spare parts for disc harrow here .
The purpose of the disc harrow
The disc harrow is primarily intended for loosening the surface layer of the soil, crushing the remains of the previous crop, destroying weeds, for cultivating fields, meadows and pastures, as well as:
- - to prepare soil for planting crops;
- - for mixing and loosening the surface layer of the soil;
- - prevents the drying of the earth, by sealing moisture in deeper layers;
- - for cutting and crushing weeds and planting them in deeper layers of the earth.
Disc harrow device
A disc harrow is a mounted or towed device, and it comes in various structures. But most often, it consists of 3 frames, central and lateral, interconnected.
The discs that ensure the operation of the harrow are located on the side frames in such a way that they easily turn in a horizontal plane. The configuration of frames, shafts and discs may vary depending on the type of soil, size and required capacity of the unit. The diagram shows a trailed heavy disc harrow.
Discs also differ in size: light (diameter 20-30 cm), heavy (diameter over 60 cm). They are round, multifaceted (the so-called "chamomile" see photo), five-toothed ("fleo-fleo").
The discs on the frame are hinged, which allows them to be rearranged at such an angle as to ensure maximum efficiency.
The principle of operation of the disc harrow
A tractor or other equipment pulls a harrow behind it, which is installed in such a way that the discs sink into the ground at a given depth and at the right angle. During the movement, the disks turn, loosening the soil and cutting off weeds. The immersion depth is adjustable and can vary from 5 to 25 cm. To fix the immersion depth of the disks, special weights are installed on the harrow. The discs, due to their shape, cut off the top layer of soil, breaking it into smaller clods. They are automatically cleared from adhering earth with the help of special scrapers-cleaners.
Advantages of a disc harrow
The disc harrow is a fairly versatile tool for tillage; among its main advantages, reliability, convenience and ease of use, and high productivity should be highlighted. You can choose a harrow based on the parameters you need: size, performance, purpose, and others, and thereby optimize the time, effort and finances spent on tillage. There are no overly complex mechanisms in the harrow, they are not difficult to maintain and repair. At the same time, a failed disk can be quickly and easily replaced right in the field without stopping work for a long time.
Disc harrow - price
Prices for disc harrows vary greatly and depend on the country of production, manufacturer, size, performance and other quality indicators.
So the cost of a domestically produced disc harrow in Ukraine starts from 15,000 UAH. These are small (1.3-2 m) units for processing relatively small areas. The price of harrows with a working width of more than 2 m averages 40,000-10,000 hryvnias.
At the same time, an imported heavy disc harrow can cost more than one hundred thousand hryvnias.
In our Art-Agro store you will find a wide range of spare parts for disc harrows from the world's best manufacturers.
Almost all work on the ground requires specialized equipment and certain equipment. For tillage, various tools are used, one of them is a disc harrow. This is a versatile unit with which you can perform many operations. You can buy spare parts for disc harrow here .
The purpose of the disc harrow
The disc harrow is primarily intended for loosening the surface layer of the soil, crushing the remains of the previous crop, destroying weeds, for cultivating fields, meadows and pastures, as well as:
- - to prepare soil for planting crops;
- - for mixing and loosening the surface layer of the soil;
- - prevents the drying of the earth, by sealing moisture in deeper layers;
- - for cutting and crushing weeds and planting them in deeper layers of the earth.
Disc harrow device
A disc harrow is a mounted or towed device, and it comes in various structures. But most often, it consists of 3 frames, central and lateral, interconnected.
The discs that ensure the operation of the harrow are located on the side frames in such a way that they easily turn in a horizontal plane. The configuration of frames, shafts and discs may vary depending on the type of soil, size and required capacity of the unit. The diagram shows a trailed heavy disc harrow.
Discs also differ in size: light (diameter 20-30 cm), heavy (diameter over 60 cm). They are round, multifaceted (the so-called "chamomile" see photo), five-toothed ("fleo-fleo").
The discs on the frame are hinged, which allows them to be rearranged at such an angle as to ensure maximum efficiency.
The principle of operation of the disc harrow
A tractor or other equipment pulls a harrow behind it, which is installed in such a way that the discs sink into the ground at a given depth and at the right angle. During the movement, the disks turn, loosening the soil and cutting off weeds. The immersion depth is adjustable and can vary from 5 to 25 cm. To fix the immersion depth of the disks, special weights are installed on the harrow. The discs, due to their shape, cut off the top layer of soil, breaking it into smaller clods. They are automatically cleared from adhering earth with the help of special scrapers-cleaners.
Advantages of a disc harrow
The disc harrow is a fairly versatile tool for tillage; among its main advantages, reliability, convenience and ease of use, and high productivity should be highlighted. You can choose a harrow based on the parameters you need: size, performance, purpose, and others, and thereby optimize the time, effort and finances spent on tillage. There are no overly complex mechanisms in the harrow, they are not difficult to maintain and repair. At the same time, a failed disk can be quickly and easily replaced right in the field without stopping work for a long time.
Disc harrow - price
Prices for disc harrows vary greatly and depend on the country of production, manufacturer, size, performance and other quality indicators.
So the cost of a domestically produced disc harrow in Ukraine starts from 15,000 UAH. These are small (1.3-2 m) units for processing relatively small areas. The price of harrows with a working width of more than 2 m averages 40,000-10,000 hryvnias.
At the same time, an imported heavy disc harrow can cost more than one hundred thousand hryvnias.
In our Art-Agro store you will find a wide range of spare parts for disc harrows from the world's best manufacturers.
Almost all work on the ground requires specialized equipment and certain equipment. For tillage, various tools are used, one of them is a disc harrow. This is a versatile unit with which you can perform many operations. You can buy spare parts for disc harrow here .
The purpose of the disc harrow
The disc harrow is primarily intended for loosening the surface layer of the soil, crushing the remains of the previous crop, destroying weeds, for cultivating fields, meadows and pastures, as well as:
- - to prepare soil for planting crops;
- - for mixing and loosening the surface layer of the soil;
- - prevents the drying of the earth, by sealing moisture in deeper layers;
- - for cutting and crushing weeds and planting them in deeper layers of the earth.
Disc harrow device
A disc harrow is a mounted or towed device, and it comes in various structures. But most often, it consists of 3 frames, central and lateral, interconnected.
The discs that ensure the operation of the harrow are located on the side frames in such a way that they easily turn in a horizontal plane. The configuration of frames, shafts and discs may vary depending on the type of soil, size and required capacity of the unit. The diagram shows a trailed heavy disc harrow.
Discs also differ in size: light (diameter 20-30 cm), heavy (diameter over 60 cm). They are round, multifaceted (the so-called "chamomile" see photo), five-toothed ("fleo-fleo").
The discs on the frame are hinged, which allows them to be rearranged at such an angle as to ensure maximum efficiency.
The principle of operation of the disc harrow
A tractor or other equipment pulls a harrow behind it, which is installed in such a way that the discs sink into the ground at a given depth and at the right angle. During the movement, the disks turn, loosening the soil and cutting off weeds. The immersion depth is adjustable and can vary from 5 to 25 cm. To fix the immersion depth of the disks, special weights are installed on the harrow. The discs, due to their shape, cut off the top layer of soil, breaking it into smaller clods. They are automatically cleared from adhering earth with the help of special scrapers-cleaners.
Advantages of a disc harrow
The disc harrow is a fairly versatile tool for tillage; among its main advantages, reliability, convenience and ease of use, and high productivity should be highlighted. You can choose a harrow based on the parameters you need: size, performance, purpose, and others, and thereby optimize the time, effort and finances spent on tillage. There are no overly complex mechanisms in the harrow, they are not difficult to maintain and repair. At the same time, a failed disk can be quickly and easily replaced right in the field without stopping work for a long time.
Disc harrow - price
Prices for disc harrows vary greatly and depend on the country of production, manufacturer, size, performance and other quality indicators.
So the cost of a domestically produced disc harrow in Ukraine starts from 15,000 UAH. These are small (1.3-2 m) units for processing relatively small areas. The price of harrows with a working width of more than 2 m averages 40,000-10,000 hryvnias.
At the same time, an imported heavy disc harrow can cost more than one hundred thousand hryvnias.
In our Art-Agro store you will find a wide range of spare parts for disc harrows from the world's best manufacturers.